"5150-01.txt"의 두 판 사이의 차이

(새 문서: LE-5150 <pre> 10 CLEAR SCREEN 20 DIM Str$[255] 30 INTEGER I,Ch,Nop,Count 40 GOSUB Fileopen 50 ASSIGN @Load TO 702 !KG LE-5150-02 load 60 T0=TIMEDATE 70...)
 
(차이 없음)

2020년 5월 6일 (수) 18:20 기준 최신판

LE-5150

10     CLEAR SCREEN
20     DIM Str$[255]
30     INTEGER I,Ch,Nop,Count
40     GOSUB Fileopen
50     ASSIGN @Load TO 702  !KG LE-5150-02 load
60     T0=TIMEDATE
70     !!!!!!!!!!!!!!!!!!!!!!!!!!!!!
80     ASSIGN @Ps TO 705  !6035 500V 5A
90  !  Ps_type=6035
100    Ps_type=66311
110    SELECT Ps_type
120    CASE 6035
130      OUTPUT @Ps;"VSET  50"!100V
140      OUTPUT @Ps;"ISET 3.1"!3A
150    CASE 66311
160      OUTPUT @Ps;"VOLT 15"!max 15V
170      OUTPUT @Ps;"CURR 3" !max 3A
171      OUTPUT @Ps;"OUTP ON"
180    END SELECT 
190    !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
200    Str$="채널1을 사용합니다."
210    DIALOG "INFORMATION",Str$,Btn
220    Ch=1
230    Offset_volt=0
240    OUTPUT @Load;"CV";Ch;",";Offset_volt;",0"
250    R_max=1000   !최대 1000
260    R_min=10     !최소 10
270    Nop=201
280    OUTPUT @File;"No., Time[s], Load R[ohm], Ps-V[V], Ps-I[A], Load V[V], Load I[V], Load P[W]"
290    !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
300    Str$="로드에 연결하십시요."
310    DIALOG "INFORMATION",Str$,Btn
320    OUTPUT @Load;"LD";Ch;",1"   ! LOAD ON
330    OUTPUT @Load;"CR";Ch;",";R_min;",0"   !첫번째 측정에 문제가 있어
340    WAIT 1
350    Count=0
360    T0=TIMEDATE
370    LOOP
380      Count=Count+1
390      R_step=(R_max-R_min)/(Nop-1)
400      R=R_max-R_step*(Count-1)
410      OUTPUT @Load;"CR";Ch;",";R;",0"
420      GOSUB Ps_reading
430      GOSUB Load_reading
440      Power=Volt*Curr
450      PRINT "No.=";Count;" Set R=";R;" V=";Volt;" I=";Curr;" P=";Power
460      T=TIMEDATE-T0
470      OUTPUT @File;Count,T,R,Volt_ps,Curr_ps,Volt,Curr,Power
480    EXIT IF Count=Nop
490    EXIT IF Curr>3
500    EXIT IF Power>150
510    END LOOP 
520    OUTPUT @Load;"LD";Ch;",0"   ! LOAD OFF
530    STOP
540    RETURN
550 Fileopen:  !
560    DIM Filename$[20],Dhms$[8]
570    Time$=TIME$(TIMEDATE)
580    Date$=DATE$(TIMEDATE)
590    Dhms$=Date$[1;2]&Time$[1;2]&Time$[4;2]&Time$[7;2]
600    Filename$=Dhms$&".txt"
610    CREATE Filename$,1
620    ASSIGN @File TO Filename$;FORMAT ON
630    RETURN
640 Ps_reading:  !
650    SELECT Ps_type
660    CASE 6035
670      OUTPUT @Ps;"VOUT?"       !volt
680      ENTER @Ps;Readv$
690      Volt_ps=VAL(Readv$[5;7])
700      OUTPUT @Ps;"IOUT?"       !curr
710      ENTER @Ps;Readi$
720      Curr_ps=VAL(Readi$[5;7])
730    CASE 66311
740      OUTPUT @Ps;"MEAS:VOLT?"       !volt
750      ENTER @Ps;Volt_ps
760      OUTPUT @Ps;"MEAS:CURR?"       !curr
770      ENTER @Ps;Curr_ps
780    END SELECT 
790    RETURN
800 Load_reading:  !
810    SELECT Count
820    CASE 1
830      FOR I=1 TO 10
840        OUTPUT @Load;"MG";Ch;",1"!volt
850        ENTER @Load;Volt
860        OUTPUT @Load;"MG";Ch;",2"!curr
870        ENTER @Load;Curr
880      NEXT I
890    CASE ELSE 
900      OUTPUT @Load;"MG";Ch;",1"!volt
910      ENTER @Load;Volt
920      OUTPUT @Load;"MG";Ch;",2"!curr
930      ENTER @Load;Curr
940    END SELECT 
950    RETURN
960    END