"4284all-bas"의 두 판 사이의 차이
잔글 |
|||
| 1번째 줄: | 1번째 줄: | ||
[[LCR-4284A]] | [[LCR-4284A]] | ||
<pre> | <pre> | ||
| − | 10 ![[LCR-4284A]] | + | 10 ![[LCR-4284A.bas]] 4284A, 2024/04/25 |
20 OPTION BASE 1 | 20 OPTION BASE 1 | ||
30 INTEGER I,Count,Btn | 30 INTEGER I,Count,Btn | ||
| 38번째 줄: | 38번째 줄: | ||
360 Typeselect: ! | 360 Typeselect: ! | ||
370 INTEGER Type_size,Type_length,Typeno | 370 INTEGER Type_size,Type_length,Typeno | ||
| − | 380 Type_size= | + | 380 Type_size=20 !문자열 배열의 크기 |
390 Type_length=15 !문자열의 길이 | 390 Type_length=15 !문자열의 길이 | ||
400 ALLOCATE Type$(Type_size)[Type_length] | 400 ALLOCATE Type$(Type_size)[Type_length] | ||
| 51번째 줄: | 51번째 줄: | ||
490 Type$(9)="TCC" !SU-222 오븐사용 | 490 Type$(9)="TCC" !SU-222 오븐사용 | ||
500 Type$(10)="TC Freq Sweep" !주파수스윕하면서 | 500 Type$(10)="TC Freq Sweep" !주파수스윕하면서 | ||
| − | + | 510 Type$(11)="Speaker-Nexvell" !스피커 | |
| − | + | 520 Type$(12)="Earphone" !이어폰 osc=0.1V | |
| − | + | 530 Type$(13)="Speaker" !스피커 | |
| − | + | 540 Type$(14)="Piezo Buzzer" ! | |
| − | + | 550 Type$(15)="AF-VCM 20-1k" ! | |
| − | + | 560 Type$(16)="Galvano" !400-600Hz !20Hz~1KHz | |
| − | + | 570 Type$(17)="Osc Spk" | |
| − | + | 580 Type$(18)="100-300Hz" | |
| − | + | 590 Type$(19)="150-200Hz" | |
| − | + | 600 Msg$="테스트 종류를 선택하십시오." | |
| − | + | 610 DIALOG "LIST",Msg$,Btn;SET("ITEMS":Type$(*),"COLUMNS":Type_length,"ROWS":Type_size),RETURN("SELECTION":Typeno) | |
| − | + | 620 Typeno=Typeno+1 | |
| − | + | 630 SELECT Type$(Typeno) | |
| − | + | 640 CASE "Norm" !샘플이 있는지 없는지 자동 인식 | |
| − | + | 650 INTEGER Go_count | |
| − | + | 660 Msg$="A-value lower limit" | |
| − | + | 670 DIALOG "STRING",Msg$,Btn;RETURN("VALUE":String$) | |
| − | + | 680 IF Btn=-1 OR Btn=1 THEN A_lcl=2.5E-11 | |
| − | + | 690 A_lcl=VAL(String$) | |
| − | + | 700 Msg$="A-value upper limit" | |
| − | + | 710 DIALOG "STRING",Msg$,Btn;RETURN("VALUE":String$) | |
| − | + | 720 IF Btn=-1 OR Btn=1 THEN A_ucl=3.5E-11 | |
| − | + | 730 A_ucl=VAL(String$) | |
| − | + | 740 Msg$="유효값 연속 횟수" | |
| − | + | 750 DIALOG "STRING",Msg$,Btn;RETURN("VALUE":String$) | |
| − | + | 760 IF Btn=-1 OR Btn=1 THEN Go_limit=5 | |
| − | + | 770 Go_limit=VAL(String$) | |
| + | 780 Msg$="허용오차 [%]" | ||
| + | 790 DIALOG "STRING",Msg$,Btn;RETURN("VALUE":String$) | ||
| + | 800 IF Btn=-1 OR Btn=1 THEN A_err=.1 | ||
| + | 810 A_err=VAL(String$) | ||
| + | 820 OUTPUT @File;"No, A, B, Vm[V], Im[A]" | ||
| + | 830 Count=0 | ||
| + | 840 LOOP | ||
| + | 850 Count=Count+1 | ||
| + | 860 REPEAT!샘플이 있나? | ||
| + | 870 GOSUB Reading | ||
| + | 880 UNTIL A>A_lcl AND A<A_ucl !LCL=lower control limit, UCL=upper control limit | ||
| + | 890 Go_count=0 | ||
| + | 900 A_pre=A | ||
| + | 910 REPEAT | ||
| + | 920 GOSUB Reading | ||
| + | 930 A_cur=A | ||
| + | 940 IF A_cur=0 THEN STOP | ||
| + | 950 A_delta=ABS((A_cur-A_pre)/A_cur)*100 | ||
| + | 960 IF A_delta<A_err THEN | ||
| + | 970 Go_count=Go_count+1 | ||
| + | 980 ELSE | ||
| + | 990 Go_count=0 | ||
| + | 1000 END IF | ||
| + | 1010 A_pre=A_cur | ||
| + | 1020 UNTIL Go_count=Go_limit | ||
| + | 1030 PRINT "No.=";Count;",A=";A;",B=";B | ||
| + | 1040 OUTPUT @File;Count,A,B,Vm,Im | ||
| + | 1050 BEEP | ||
| + | 1060 REPEAT!샘플이 없나? | ||
| + | 1070 GOSUB Reading | ||
| + | 1080 UNTIL A<A_lcl OR A>A_ucl | ||
| + | 1090 END LOOP | ||
| + | 1100 CASE "Freq Sweep","Speaker-Nexvell","Speaker","Earphone | ||
</pre> | </pre> | ||
2024년 4월 25일 (목) 12:48 기준 최신판
10 ![[LCR-4284A.bas]] 4284A, 2024/04/25
20 OPTION BASE 1
30 INTEGER I,Count,Btn
40 DIM Msg$[50],Id$[50],String$[50]
50 CLEAR SCREEN
60 GOSUB Fileopen
70 GOSUB Setup
80 GOSUB Funcselect
90 GOSUB Typeselect
100 OUTPUT @Lcr;"TRIG:SOUR INT"
110 STOP
120 Setup: !
130 ASSIGN @Lcr TO 717
140 REMOTE @Lcr
150 !OUTPUT @Lcr;"*RST"
160 OUTPUT @Lcr;"*CLS"
170 OUTPUT @Lcr;"*ESE 60"
180 OUTPUT @Lcr;"*SRE 32"
190 ON INTR 7 CALL Errors
200 ENABLE INTR 7;2
210 OUTPUT @Lcr;"*IDN?"
220 ENTER @Lcr;Id$
230 PRINT Id$
240 OUTPUT @Lcr;"TRIG:SOUR BUS"
250 OUTPUT @Lcr;"ABORT;:INIT"
260 RETURN
270 Fileopen: !
280 DIM Filename$[20],Dhms$[8]
290 Time$=TIME$(TIMEDATE)
300 Date$=DATE$(TIMEDATE)
310 Dhms$=Date$[1;2]&Time$[1;2]&Time$[4;2]&Time$[7;2]
320 Filename$=Dhms$&".txt"
330 CREATE Filename$,1
340 ASSIGN @File TO Filename$;FORMAT ON
350 RETURN
360 Typeselect: !
370 INTEGER Type_size,Type_length,Typeno
380 Type_size=20 !문자열 배열의 크기
390 Type_length=15 !문자열의 길이
400 ALLOCATE Type$(Type_size)[Type_length]
410 Type$(1)="Norm"
420 Type$(2)="Freq Sweep"
430 Type$(3)="Freq-48 Sweep"
440 Type$(4)="DC Bias Sweep"
450 Type$(5)="Osc Level Sweep"
460 Type$(6)="Time Sweep"
470 Type$(7)="Freq St-Sp"
480 Type$(8)="Freq 1k-1M"
490 Type$(9)="TCC" !SU-222 오븐사용
500 Type$(10)="TC Freq Sweep" !주파수스윕하면서
510 Type$(11)="Speaker-Nexvell" !스피커
520 Type$(12)="Earphone" !이어폰 osc=0.1V
530 Type$(13)="Speaker" !스피커
540 Type$(14)="Piezo Buzzer" !
550 Type$(15)="AF-VCM 20-1k" !
560 Type$(16)="Galvano" !400-600Hz !20Hz~1KHz
570 Type$(17)="Osc Spk"
580 Type$(18)="100-300Hz"
590 Type$(19)="150-200Hz"
600 Msg$="테스트 종류를 선택하십시오."
610 DIALOG "LIST",Msg$,Btn;SET("ITEMS":Type$(*),"COLUMNS":Type_length,"ROWS":Type_size),RETURN("SELECTION":Typeno)
620 Typeno=Typeno+1
630 SELECT Type$(Typeno)
640 CASE "Norm" !샘플이 있는지 없는지 자동 인식
650 INTEGER Go_count
660 Msg$="A-value lower limit"
670 DIALOG "STRING",Msg$,Btn;RETURN("VALUE":String$)
680 IF Btn=-1 OR Btn=1 THEN A_lcl=2.5E-11
690 A_lcl=VAL(String$)
700 Msg$="A-value upper limit"
710 DIALOG "STRING",Msg$,Btn;RETURN("VALUE":String$)
720 IF Btn=-1 OR Btn=1 THEN A_ucl=3.5E-11
730 A_ucl=VAL(String$)
740 Msg$="유효값 연속 횟수"
750 DIALOG "STRING",Msg$,Btn;RETURN("VALUE":String$)
760 IF Btn=-1 OR Btn=1 THEN Go_limit=5
770 Go_limit=VAL(String$)
780 Msg$="허용오차 [%]"
790 DIALOG "STRING",Msg$,Btn;RETURN("VALUE":String$)
800 IF Btn=-1 OR Btn=1 THEN A_err=.1
810 A_err=VAL(String$)
820 OUTPUT @File;"No, A, B, Vm[V], Im[A]"
830 Count=0
840 LOOP
850 Count=Count+1
860 REPEAT!샘플이 있나?
870 GOSUB Reading
880 UNTIL A>A_lcl AND A<A_ucl !LCL=lower control limit, UCL=upper control limit
890 Go_count=0
900 A_pre=A
910 REPEAT
920 GOSUB Reading
930 A_cur=A
940 IF A_cur=0 THEN STOP
950 A_delta=ABS((A_cur-A_pre)/A_cur)*100
960 IF A_delta<A_err THEN
970 Go_count=Go_count+1
980 ELSE
990 Go_count=0
1000 END IF
1010 A_pre=A_cur
1020 UNTIL Go_count=Go_limit
1030 PRINT "No.=";Count;",A=";A;",B=";B
1040 OUTPUT @File;Count,A,B,Vm,Im
1050 BEEP
1060 REPEAT!샘플이 없나?
1070 GOSUB Reading
1080 UNTIL A<A_lcl OR A>A_ucl
1090 END LOOP
1100 CASE "Freq Sweep","Speaker-Nexvell","Speaker","Earphone"
1110 SELECT Type$(Typeno)
1120 CASE "Earphone"
1130 OUTPUT @Lcr;"VOLT:LEV 0.1V"
1140 CASE ELSE
1150 GOSUB Oscselect
1160 END SELECT
1170 OUTPUT @File;"No, Freq[Hz], A, B, Vm[V], Im[A]"
1180 OUTPUT @Lcr;"FREQ:CW? MIN"
1190 ENTER @Lcr;Freq_min !20Hz
1200 OUTPUT @Lcr;"FREQ:CW? MAX"
1210 ENTER @Lcr;Freq_max !1MHz
1220 SELECT Type$(Typeno)
1230 CASE "Freq Sweep"
1240 Freq_octv=20
1250 Freq_min=20
1260 Freq_max=1.E+6
1270 GOSUB Chart_var
1280 GOSUB Init_chart
1290 CASE "Speaker-Nexvell"
1300 Freq_octv=50
1310 Freq_min=20
1320 Freq_max=10000
1330 CASE "Earphone"
1340 Freq_octv=100
1350 Freq_min=20
1360 Freq_max=20000
1370 CASE "Speaker"
1380 Freq_octv=100
1390 Freq_min=20
1400 Freq_max=20000
1410 END SELECT
1420 Freq=Freq_min
1430 Count=0
1440 Freq_p=0
1450 LOOP
1460 IF Freq>Freq_max THEN Freq=Freq_max
1470 OUTPUT @Lcr;"FREQ:CW ";Freq !command
1480 OUTPUT @Lcr;"FREQ:CW?"
1490 ENTER @Lcr;Freq_level
1500 IF Freq_p<>Freq_level THEN
1510 Count=Count+1
1520 Freq_p=Freq_level
1530 Log_freq=LOG(Freq_level)/LOG(10)
1540 GOSUB Reading
1550 IF A<0 THEN
1560 Y(1)=.1
1570 ELSE
1580 Y(1)=LOG(A)/LOG(10)
1590 END IF
1600 Y(2)=.1 !사용하지 않음
1610 CONTROL @Strip;SET("POINT LOCATION":Log_freq,"VALUES":Y(*))
1620 PRINT "No.=";Count;",Freq=";Freq_level;"Hz,A=";A;",B=";B
1630 OUTPUT @File;Count,Freq_level,A,B,Vm,Im
1640 BEEP
1650 END IF
1660 Freq=Freq*10^(1/Freq_octv)
1670 EXIT IF Freq_level>=Freq_max
1680 END LOOP
1690 OUTPUT @Lcr;"FREQ:CW 1000" !연결되었는지 확인하기 위해 1kHz 발진
1700 SELECT Type$(Typeno)
1710 CASE "Earphone"
1720 OUTPUT @Lcr;"VOLT:LEV 0.1V"
1730 CASE ELSE
1740 OUTPUT @Lcr;"VOLT:LEV 1V" !init
1750 END SELECT
1760 CASE "Piezo Buzzer"
1770 GOSUB Oscselect
1780 OUTPUT @File;"No, Freq[Hz], A, B, Vm[V], Im[A]"
1790 Freq_min=1000 !반드시
1800 Freq_max=5000 !1M 이내에서
1810 Freq=Freq_min
1820 GOSUB Freq1k1m_read
1830 Count=0
1840 LOOP
1850 Count=Count+1
1860 OUTPUT @Lcr;"FREQ:CW ";Freq1k1m(Count) !command
1870 OUTPUT @Lcr;"FREQ:CW?"
1880 ENTER @Lcr;Freq_level
1890 GOSUB Reading
1900 PRINT "No.=";Count;",Freq=";Freq_level;"Hz,A=";A;",B=";B
1910 OUTPUT @File;Count,Freq_level,A,B,Vm,Im
1920 BEEP
1930 EXIT IF Freq_level>Freq_max
1940 END LOOP
1950 OUTPUT @Lcr;"FREQ:CW ";Freq1k1m(1) !1kHz
1960 OUTPUT @Lcr;"VOLT:LEV 1V" !init
1970 CASE "AF-VCM 20-1k"
1980 GOSUB Oscselect
1990 OUTPUT @File;"No, Freq[Hz], A, B, Vm[V], Im[A]"
2000 Freq_min=20 !100
2010 Freq_max=1000 !1000
2020 Freq=Freq_min
2030 Count=0
2040 Freq_p=0
2050 FOR Freq=Freq_min TO Freq_max STEP 5 !5
2060 OUTPUT @Lcr;"FREQ:CW ";Freq !command
2070 OUTPUT @Lcr;"FREQ:CW?"
2080 ENTER @Lcr;Freq_level
2090 IF Freq_p<>Freq_level THEN
2100 Count=Count+1
2110 GOSUB Reading
2120 PRINT "No.=";Count;",Freq=";Freq_level;"Hz,A=";A;",B=";B
2130 OUTPUT @File;Count,Freq_level,A,B,Vm,Im
2140 Freq_p=Freq_level
2150 BEEP
2160 END IF
2170 NEXT Freq
2180 OUTPUT @Lcr;"VOLT:LEV 1V" !init
2190 CASE "Galvano","100-300Hz","150-200Hz"
2200 GOSUB Chart_var
2210 GOSUB Init_chart
2220 GOSUB Oscselect
2230 OUTPUT @File;"No, Freq[Hz], A, B"
2240 SELECT Type$(Typeno)
2250 CASE "Galvano"
2260 Freq_min=20 !100
2270 Freq_max=200 !1000
2280 Freq_step=1
2290 CASE "100-300Hz"
2300 Freq_min=100
2310 Freq_max=300
2320 Freq_step=1
2330 CASE "150-200Hz"
2340 Freq_min=150
2350 Freq_max=200
2360 Freq_step=.1
2370 END SELECT
2380 Freq=Freq_min
2390 Count=0
2400 Freq_p=0
2410 FOR Freq=Freq_min TO Freq_max STEP Freq_step !5
2420 Count=Count+1
2430 OUTPUT @Lcr;"FREQ:CW ";Freq !command
2440 OUTPUT @Lcr;"FREQ:CW?"
2450 ENTER @Lcr;Freq_level
2460 IF Freq_level<>Freq_p THEN !주파수가 종래와 같지 않으면
2470 GOSUB Reading
2480 PRINT "No.=";Count;",Freq=";Freq_level;"Hz,A=";A;",B=";B
2490 OUTPUT @File;Count,Freq_level,A,B
2500 Y(1)=A*10
2510 Y(2)=B+50
2520 CONTROL @Strip;SET("POINT LOCATION":Freq_level,"VALUES":Y(*))
2530 BEEP
2540 Freq_p=Freq_level
2550 END IF
2560 NEXT Freq
2570 OUTPUT @Lcr;"VOLT:LEV 1V" !init
2580 CASE "Freq St-Sp"
2590 GOSUB Oscselect
2600 OUTPUT @File;"No, Freq[Hz], A, B, Vm[V], Im[A]"
2610 Freq_min=1000 !100
2620 Freq_max=6000 !1000
2630 Freq=Freq_min
2640 Count=0
2650 FOR Freq=Freq_min TO Freq_max STEP 10 !5
2660 Count=Count+1
2670 OUTPUT @Lcr;"FREQ:CW ";Freq !command
2680 OUTPUT @Lcr;"FREQ:CW?"
2690 ENTER @Lcr;Freq_level
2700 GOSUB Reading
2710 PRINT "No.=";Count;",Freq=";Freq_level;"Hz,A=";A;",B=";B
2720 OUTPUT @File;Count,Freq_level,A,B,Vm,Im
2730 BEEP
2740 NEXT Freq
2750 OUTPUT @Lcr;"VOLT:LEV 1V" !init
2760 CASE "Freq-48 Sweep"
2770 GOSUB Oscselect
2780 GOSUB Freq48
2790 OUTPUT @File;"No, Freq[Hz], A, B, Vm[V], Im[A]"
2800 FOR I=1 TO 48
2810 OUTPUT @Lcr;"FREQ:CW ";Freq48(I)
2820 GOSUB Reading
2830 PRINT "No.=";I;",Freq=";Freq48(I);"Hz,A=";A;",B=";B
2840 OUTPUT @File;I,Freq48(I),A,B,Vm,Im
2850 BEEP
2860 NEXT I
2870 OUTPUT @Lcr;"VOLT:LEV 1V" !init
2880 CASE "Freq 1k-1M"
2890 GOSUB Oscselect
2900 GOSUB Freq1k1m_read
2910 OUTPUT @File;"No, Freq[Hz], A, B, Vm[V], Im[A]"
2920 FOR I=1 TO 279
2930 OUTPUT @Lcr;"FREQ:CW ";Freq1k1m(I)
2940 GOSUB Reading
2950 PRINT "No.=";I;",Freq=";Freq1k1m(I);"Hz,A=";A;",B=";B
2960 OUTPUT @File;I,Freq1k1m(I),A,B,Vm,Im
2970 BEEP
2980 NEXT I
2990 OUTPUT @Lcr;"VOLT:LEV 1V" !init
3000 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
3010 CASE "DC Bias Sweep"
3020 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
3030 OUTPUT @Lcr;"BIAS:VOLT:LEV? MIN"
3040 ENTER @Lcr;Bias_min
3050 OUTPUT @Lcr;"BIAS:VOLT:LEV? MAX"
3060 ENTER @Lcr;Bias_max
3070 OUTPUT @Lcr;"BIAS:STAT ON" ! DC BIAS ON
3080 Count=0
3090 Bias_type=5 !!1 2 3 4 5 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
3100 SELECT Bias_type
3110 CASE 1 !DC bias Volt
3120 GOSUB Oscselect
3130 GOSUB Freqselect
3140 OUTPUT @File;"No, DC-Bias[V], A, B, Vm[V], Im[A]"
3150 FOR Bias=-40 TO +40 STEP .2 !0~5V NOP=100
3160 Count=Count+1
3170 OUTPUT @Lcr;"BIAS:VOLT:LEV ";Bias
3180 GOSUB Reading
3190 PRINT "No.=";Count;",Bias=";Bias;"V, A=";A;",B=";B
3200 OUTPUT @File;Count,Bias,A,B,Vm,Im
3210 BEEP
3220 NEXT Bias
3230 CASE 2 !DC bias Curr
3240 GOSUB Oscselect
3250 GOSUB Freqselect
3260 OUTPUT @File;"No, DC-Bias[mA], A, B, Vm[V], Im[A]"
3270 FOR Bias=-.1 TO +.1 STEP .001 !-100mA~+100mA
3280 Count=Count+1
3290 OUTPUT @Lcr;"BIAS:CURR:LEV ";Bias !command
3300 GOSUB Reading
3310 PRINT "No.=";Count;",Bias=";Bias;"A, A=";A;",B=";B
3320 OUTPUT @File;Count,Bias*1000,A,B,Vm,Im
3330 BEEP
3340 NEXT Bias
3350 CASE 5 !DC bias: -10V -1V 0V +0.25V +0.5V +1V
3360 DIM Bias_array(6)
3370 Bias_array(1)=-10
3380 Bias_array(2)=-1
3390 Bias_array(3)=0
3400 Bias_array(4)=.25
3410 Bias_array(5)=.5
3420 Bias_array(6)=1
3430 OUTPUT @Lcr;"FREQ 1MHZ" !1MHz osc !!!!!!!!!!!!!!!
3440 OUTPUT @Lcr;"VOLT 0.02V" !20mV osc !!!!!!!!!!!!!!!!!
3450 OUTPUT @File;"No, DC-Bias[V], Z[ohm], Phase[deg]"
3460 FOR I=1 TO 6 STEP 1
3470 OUTPUT @Lcr;"BIAS:VOLT:LEV ";Bias_array(I)
3480 GOSUB Reading
3490 PRINT "No.=";I;",Bias=";Bias_array(I);"V, Z=";A;",Phase=";B
3500 OUTPUT @File;I,Bias_array(I),A,B
3510 BEEP
3520 NEXT I
3530 CASE 3 !DC bias Volt + 1MHz C
3540 GOSUB Oscselect
3550 GOSUB Freqselect
3560 Count=0
3570 OUTPUT @File;"No, DC-Bias[V], A, B, Vm[V], Im[A]"
3580 FOR Bias=10 TO 1 STEP -1
3590 Count=Count+1
3600 OUTPUT @Lcr;"BIAS:VOLT:LEV ";-Bias
3610 GOSUB Reading
3620 PRINT "No.=";Count;",Bias=";-Bias;"V, A=";A;",B=";B
3630 OUTPUT @File;Count,-Bias,A,B,Vm,Im
3640 BEEP
3650 NEXT Bias
3660 FOR Bias=.9 TO .1 STEP -.1
3670 Count=Count+1
3680 OUTPUT @Lcr;"BIAS:VOLT:LEV ";-Bias
3690 GOSUB Reading
3700 PRINT "No.=";Count;",Bias=";-Bias;"V, A=";A;",B=";B
3710 OUTPUT @File;Count,-Bias,A,B,Vm,Im
3720 BEEP
3730 NEXT Bias
3740 FOR Bias=.09 TO .01 STEP -.01
3750 Count=Count+1
3760 OUTPUT @Lcr;"BIAS:VOLT:LEV ";-Bias
3770 GOSUB Reading
3780 PRINT "No.=";Count;",-Bias=";Bias;"V, A=";A;",B=";B
3790 OUTPUT @File;Count,-Bias,A,B,Vm,Im
3800 BEEP
3810 NEXT Bias
3820 FOR Bias=.009 TO 0. STEP -.001
3830 Count=Count+1
3840 OUTPUT @Lcr;"BIAS:VOLT:LEV ";-Bias
3850 GOSUB Reading
3860 PRINT "No.=";Count;",Bias=";-Bias;"V, A=";A;",B=";B
3870 OUTPUT @File;Count,-Bias,A,B,Vm,Im
3880 BEEP
3890 NEXT Bias
3900 !!!!!!!!!!!!!!!!!! + 바이어스
3910 FOR Bias=.001 TO .009 STEP .001
3920 Count=Count+1
3930 OUTPUT @Lcr;"BIAS:VOLT:LEV ";Bias
3940 GOSUB Reading
3950 PRINT "No.=";Count;",Bias=";Bias;"V, A=";A;",B=";B
3960 OUTPUT @File;Count,Bias,A,B,Vm,Im
3970 BEEP
3980 NEXT Bias
3990 FOR Bias=.01 TO .09 STEP .01
4000 Count=Count+1
4010 OUTPUT @Lcr;"BIAS:VOLT:LEV ";Bias
4020 GOSUB Reading
4030 PRINT "No.=";Count;",Bias=";Bias;"V, A=";A;",B=";B
4040 OUTPUT @File;Count,Bias,A,B,Vm,Im
4050 BEEP
4060 NEXT Bias
4070 FOR Bias=.1 TO 1. STEP .01
4080 Count=Count+1
4090 OUTPUT @Lcr;"BIAS:VOLT:LEV ";Bias
4100 GOSUB Reading
4110 PRINT "No.=";Count;",Bias=";Bias;"V, A=";A;",B=";B
4120 OUTPUT @File;Count,Bias,A,B,Vm,Im
4130 BEEP
4140 NEXT Bias
4150 CASE 4 !DC bias Curr + Freq Sweep !diode
4160 GOSUB Oscselect
4170 OUTPUT @File;"No, DC-Bias[A], Freq[Hz], A, B, Vm[V], Im[A]"
4180 FOR Bias=-.1 TO +.101 STEP .002 !!!!!!!!!!!!!!-100mA~+100mA
4190 Count=0
4200 Freq_p=0
4210 OUTPUT @Lcr;"BIAS:CURR:LEV ";Bias !command
4220 FOR Freq=150 TO 200 STEP .1 !!!!!!!!!!!!!!!!!!!!!
4230 OUTPUT @Lcr;"FREQ:CW ";Freq !command
4240 OUTPUT @Lcr;"FREQ:CW?"
4250 ENTER @Lcr;Freq_level
4260 IF Freq_p<>Freq_level THEN
4270 Count=Count+1
4280 Freq_p=Freq_level
4290 ! WAIT 1
4300 GOSUB Reading
4310 PRINT "No.=";Count;"Bias=";Bias*1000;"mA, Freq=";Freq_level;"Hz,A=";A;",B=";B
4320 OUTPUT @File;Count,Bias,Freq_level,A,B,Vm,Im
4330 BEEP
4340 END IF
4350 NEXT Freq
4360 NEXT Bias
4370 END SELECT
4380 OUTPUT @Lcr;"BIAS:VOLT:LEV 0V" !command
4390 OUTPUT @Lcr;"BIAS:STAT OFF" ! DC BIAS OFF
4400 CASE "Osc Level Sweep"
4410 GOSUB Freqselect
4420 OUTPUT @File;"No, Osc-Level[V], A, B, Vm[V], Im[A]"
4430 OUTPUT @Lcr;"VOLT:LEV? MIN"
4440 ENTER @Lcr;Osc_min !5mV
4450 OUTPUT @Lcr;"VOLT:LEV? MAX"
4460 ENTER @Lcr;Osc_max !20V
4470 Osc_octv=20
4480 Osc=Osc_min
4490 Count=0
4500 LOOP
4510 Count=Count+1
4520 OUTPUT @Lcr;"VOLT:LEV ";Osc !command
4530 Osc=Osc*10^(1/Osc_octv)
4540 OUTPUT @Lcr;"VOLT:LEV?"
4550 ENTER @Lcr;Osc_level
4560 GOSUB Reading
4570 PRINT "No.=";Count;",Osc=";Osc_level;"V,A=";A;",B=";B
4580 OUTPUT @File;Count,Osc_level,A,B,Vm,Im
4590 BEEP
4600 EXIT IF Osc>Osc_max
4610 END LOOP
4620 OUTPUT @Lcr;"VOLT:LEV 1V" !init
4630 CASE "Osc Spk"
4640 OUTPUT @File;"No, Freq[Hz], A, B, Vm[V], Im[A]"
4650 OUTPUT @Lcr;"VOLT:LEV? MIN"
4660 ENTER @Lcr;Osc_min !5mV
4670 OUTPUT @Lcr;"VOLT:LEV? MAX"
4680 ENTER @Lcr;Osc_max !20V
4690 Osc_min=.01 !10mV
4700 Osc_max=10 !100mV 이어폰인경우
4710 Osc_octv=5 !=5
4720 Osc=Osc_min
4730 Freq_octv=75 !=75
4740 Freq_min=100
4750 Freq_max=10000
4760 Count=0
4770 LOOP
4780 OUTPUT @Lcr;"VOLT:LEV ";Osc !command
4790 Osc=Osc*10^(1/Osc_octv)
4800 OUTPUT @Lcr;"VOLT:LEV?"
4810 ENTER @Lcr;Osc_level
4820 PRINT "No.=";Count;",Osc=";Osc_level
4830 OUTPUT @File;Count,Osc_level,Osc_level
4840 Freq=Freq_min
4850 LOOP
4860 Count=Count+1
4870 IF Freq>Freq_max THEN Freq=Freq_max
4880 OUTPUT @Lcr;"FREQ:CW ";Freq !command
4890 Freq=Freq*10^(1/Freq_octv)
4900 OUTPUT @Lcr;"FREQ:CW?"
4910 ENTER @Lcr;Freq_level
4920 GOSUB Reading
4930 PRINT "No.=";Count;",Freq=";Freq_level;"Hz,A=";A;",B=";B
4940 OUTPUT @File;Count,Freq_level,A,B,Vm,Im
4950 BEEP
4960 EXIT IF Freq>=Freq_max*1.01
4970 END LOOP
4980 BEEP
4990 EXIT IF Osc>Osc_max*1.01
5000 END LOOP
5010 OUTPUT @Lcr;"VOLT:LEV 1V" !init
5020 CASE "Time Sweep" !몇 초 간격으로 몇 회
5030 INTEGER Nop,L1,L2
5040 Msg$="시간간격 [ms]"
5050 DIALOG "STRING",Msg$,Btn;RETURN("VALUE":String$)
5060 IF Btn=-1 OR Btn=1 THEN STOP
5070 Period=VAL(String$)
5080 Msg$="측정횟수 "
5090 DIALOG "STRING",Msg$,Btn;RETURN("VALUE":String$)
5100 IF Btn=-1 OR Btn=1 THEN STOP
5110 Nop=VAL(String$)
5120 GOSUB Freqselect
5130 OUTPUT @File;"No, Time[S], A, B, Vm[V], Im[A]"
5140 Count=0
5150 T0=TIMEDATE
5160 T=TIMEDATE-T0 !second.
5170 LOOP
5180 Count=Count+1
5190 GOSUB Reading
5200 T1=Period/1000.*(Count-1)
5210 PRINT "No.=";Count;",Time=";T1;"s,A=";A;",B=";B
5220 OUTPUT @File;Count,T,A,B,Vm,Im
5230 BEEP
5240 LOOP
5250 T=TIMEDATE-T0 !second.
5260 IF T>3276.7 THEN
5270 L1=INT(T)
5280 L2=INT(Period/1000)
5290 ELSE
5300 L1=INT(T*10)
5310 L2=INT(Period/100)
5320 END IF
5330 EXIT IF (L1 MOD L2)=0
5340 END LOOP
5350 EXIT IF Count=Nop
5360 END LOOP
5370 CASE "TCC"
5380 ASSIGN @Su TO 701
5390 GOSUB Freqselect
5400 GOSUB Oscselect
5410 OUTPUT @File;"No, Time[m], Temp['C], A, B, Vm[V], Im[A]"
5420 Count=0
5430 Temp0=0
5440 T0=TIMEDATE
5450 LOOP
5460 T1=TIMEDATE-T0 !초단위
5470 OUTPUT @Su;"TEMP?"
5480 WAIT .1
5490 ENTER @Su;Temp,Tmp,Tmp,Tmp
5500 IF Temp0<>Temp THEN !온도차이가 0.1도 이상 발생되면 LCR 값을 측정한다.
5510 Count=Count+1
5520 GOSUB Reading !A,B,Vm,Im
5530 PRINT "No.=";Count;" Time=";T1;"s, Temp=";Temp;"'C, A=";A;", B=";B
5540 OUTPUT @File;T1/60.,Temp,A,B,Vm,Im
5550 END IF
5560 Temp0=Temp
5570 END LOOP
5580 OUTPUT @Su;"POWER,OFF"
5590 CASE "TC Freq Sweep"
5600 GOSUB Oscselect
5610 OUTPUT @File;"No, Freq[Hz], A, B, Vm[V], Im[A]"
5620 ASSIGN @Su TO 701
5630 OUTPUT @Su;"MODE,CONSTANT"
5640 Freq_min=100 !100
5650 Freq_max=300 !1000
5660 Count=0
5670 FOR Temp_set=-20 TO 150 STEP 10
5680 OUTPUT @Su;"TEMP,S";Temp_set !해당온도로 세팅
5690 Set=0
5700 LOOP
5710 OUTPUT @Su;"TEMP?"
5720 WAIT .1
5730 ENTER @Su;Temp,Tmp,Tmp,Tmp
5740 IF Temp=Temp_set THEN
5750 Set=1
5760 WAIT 100 !100초동안 기다린다.
5770 END IF
5780 IF Set=1 THEN
5790 OUTPUT @Su;"TEMP?"
5800 WAIT .1
5810 ENTER @Su;Temp,Tmp,Tmp,Tmp
5820 END IF
5830 EXIT IF Set=1
5840 END LOOP !현재 온도가 세팅온도가 되면 루프에서 탈출
5850 OUTPUT @File;Temp,"'C"
5860 FOR Freq=Freq_min TO Freq_max STEP 1 !5
5870 Count=Count+1
5880 OUTPUT @Lcr;"FREQ:CW ";Freq !command
5890 OUTPUT @Lcr;"FREQ:CW?"
5900 ENTER @Lcr;Freq_level
5910 GOSUB Reading
5920 PRINT "No.=";Count;",Freq=";Freq_level;"Hz,A=";A;",B=";B
5930 OUTPUT @File;Count,Freq_level,A,B,Vm,Im
5940 NEXT Freq
5950 NEXT Temp_set
5960 OUTPUT @Su;"POWER,OFF"
5970 END SELECT
5980 RETURN
5990 Funcselect:!
6000 INTEGER Func_size,Func_length,Funcno
6010 Func_size=20 !문자열 배열의 크기
6020 Func_length=5 !문자열의 길이
6030 ALLOCATE Funcdis$(Func_size)[Func_length]
6040 DATA "Cp-D","Cp-Q","Cp-G","Cp-Rp","Cs-D","Cs-Q","Cs-Rs"
6050 DATA "Lp-Q","Lp-D","Lp-G","Lp-Rp","Ls-D","Ls-Q","Ls-Rs"
6060 DATA "R-X","Z-deg","Z-rad","G-B","Y-deg","Y-rad"
6070 FOR I=1 TO Func_size
6080 READ Funcdis$(I)
6090 NEXT I
6100 ALLOCATE Func$(Func_size)[Func_length]
6110 DATA "CPD","CPQ","CPG","CPRP","CSD","CSQ","CSRS"
6120 DATA "LPQ","LPD","LPG","LPRP","LSD","LSQ","LSRS"
6130 DATA "RX","ZTD","ZTR","GB","YTD","YTR"
6140 FOR I=1 TO Func_size
6150 READ Func$(I)
6160 NEXT I
6170 Msg$="테스트 종류를 선택하십시오."
6180 DIALOG "LIST",Msg$,Btn;SET("ITEMS":Funcdis$(*),"COLUMNS":Func_length,"ROWS":Func_size),RETURN("SELECTION":Funcno)
6190 IF Btn=-1 OR Btn=1 THEN STOP
6200 Funcno=Funcno+1
6210 OUTPUT @Lcr;"FUNC:IMP:TYPE ";TRIM$(Func$(Funcno))
6220 RETURN
6230 Oscselect: !
6240 INTEGER Osc_size,Osc_length,Oscno
6250 Osc_size=12 !문자열 배열의 크기
6260 Osc_length=5 !문자열의 길이
6270 ALLOCATE Oscdis$(Osc_size)[Osc_length]
6280 Oscdis$(1)="0.02V" !diode
6290 Oscdis$(2)="0.05V"
6300 Oscdis$(3)="0.1V"
6310 Oscdis$(4)="0.5V"
6320 Oscdis$(5)="1V"
6330 Oscdis$(6)="5V"
6340 Oscdis$(7)="6V"
6350 Oscdis$(8)="7V"
6360 Oscdis$(9)="7.1V"
6370 Oscdis$(10)="7.3V"
6380 Oscdis$(11)="10V"
6390 Msg$="측정 전압을 선택하십시요"
6400 DIALOG "LIST",Msg$,Btn;SET("ITEMS":Oscdis$(*),"COLUMNS":Osc_length,"ROWS":Osc_size),RETURN("SELECTION":Oscno)
6410 IF Btn=-1 OR Btn=1 THEN STOP
6420 Oscno=Oscno+1
6430 OUTPUT @Lcr;"VOLT ";TRIM$(Oscdis$(Oscno))
6440 RETURN
6450 Freqselect: !
6460 INTEGER Freq_size,Freq_length,Freqno
6470 Freq_size=6 !문자열 배열의 크기
6480 Freq_length=5 !문자열의 길이
6490 ALLOCATE Freqdis$(Freq_size)[Freq_length]
6500 Freqdis$(1)="1KHZ"
6510 Freqdis$(2)="1MHZ"
6520 Freqdis$(3)="214HZ"
6530 Freqdis$(4)="330HZ"
6540 Freqdis$(5)="355HZ"
6550 Freqdis$(6)="173HZ"
6560 Msg$="주파수를 선택하십시오."
6570 DIALOG "LIST",Msg$,Btn;SET("ITEMS":Freqdis$(*),"COLUMNS":Freq_length,"ROWS":Freq_size),RETURN("SELECTION":Freqno)
6580 IF Btn=-1 OR Btn=1 THEN STOP
6590 Freqno=Freqno+1
6600 OUTPUT @Lcr;"FREQ ";TRIM$(Freqdis$(Freqno))
6610 RETURN
6620 Freq48: !
6630 DIM Freq48(48)
6640 DATA 20,25,30,40,50,60,80
6650 DATA 100,120,150,200,250,300,400,500,600,800
6660 DATA 1000,1200,1500,2000,2500,3000,4000,5000,6000,8000
6670 DATA 10000,12000,15000,20000,25000,30000,40000,50000,60000,80000
6680 DATA 100000,120000,150000,200000,250000,300000,400000,500000,600000,800000
6690 DATA 1000000
6700 FOR I=1 TO 48
6710 READ Freq48(I)
6720 NEXT I
6730 RETURN
6740 Freq1k1m_read: !
6750 DIM Freq1k1m(279)
6760 DATA 1,1.00806,1.01351,1.01695,1.02459,1.0274,1.03448,1.04167,1.05263,1.05634
6770 DATA 1.05932,1.07143,1.07759,1.08696,1.0909,1.09649,1.10294,1.11111,1.11607,1.1194
6780 DATA 1.13208,1.13637,1.15385,1.15741,1.17188,1.17647,1.17925,1.19048,1.2,1.20192
6790 DATA 1.20968,1.22449,1.22549,1.22951,1.25,1.27119,1.27551,1.2766,1.2931,1.30208
6800 DATA 1.30435,1.31579,1.32979,1.33929,1.3587,1.36364,1.38889,1.39535,1.41509,1.42045
6810 DATA 1.42857,1.44231,1.45349,1.46341,1.47059,1.4881,1.5,1.52439,1.53061,1.53846
6820 DATA 1.5625,1.57895,1.59574,1.60256,1.62612,1.63043,1.64474,1.66667,1.68919,1.70455
6830 DATA 1.71429,1.73611,1.74419,1.76471,1.78571,1.81818,1.82927,1.83824,1.875,1.89394
6840 DATA 1.92308,1.93548,1.95313,1.97368,2,2.01613,2.02703,2.06897,2.08333,2.14286
6850 DATA 2.15517,2.20588,2.22222,2.23214,2.27273,2.30769,2.31481,2.34375,2.4,2.40385
6860 DATA 2.41935,2.5,2.58621,2.60417,2.6087,2.67857,2.71739,2.72727,2.77778,2.84091
6870 DATA 2.85714,2.88462,2.97619,3,3.125,3.15789,3.26087,3.28947,3.33333,3.40909
6880 DATA 3.47222,3.52942,3.57143,3.67647,3.75,3.90625,3.94737,4,4.16667,4.28571
6890 DATA 4.41176,4.46429,4.61538,4.6875,4.80769,5,5.17241,5.20833,5.21739,5.35714
6900 DATA 5.43478,5.45455,5.55556,5.68182,5.71429,5.76923,5.95238,6,6.25,6.31579
6910 DATA 6.52174,6.57895,6.66666,6.81818,6.94444,7.05882,7.14286,7.35294,7.5,7.8125
6920 DATA 7.89474,8,8.33333,8.57243,8.82352,8.92857,9.23077,9.375,9.61538,10
6930 DATA 10.3448,10.4167,10.4348,10.7143,10.8696,10.9091,11.1111,11.3636,11.4286,11.5385
6940 DATA 11.9048,12,12.5,12.6316,13.0435,13.1579,13.3333,13.6364,13.8889,14.1176
6950 DATA 14.2857,14.7059,15,15.625,15.7895,16,16.6667,17.1429,17.6471,17.8571
6960 DATA 18.4615,18.75,19.2308,20,20.6897,20.8333,20.8696,21.4286,21.7391,21.8182
6970 DATA 22.2222,22.7272,22.8571,23.0769,23.8095,24,25,25.2632,26.087,26.3158
6980 DATA 26.6667,27.2727,27.7778,28.2353,28.5714,29.4118,30,31.25,31.5789,32
6990 DATA 33.3333,34.2857,35.2941,35.7143,36.9231,37.5,38.4615,40,41.6667,42.8571
7000 DATA 43.6364,45.4545,46.1538,48,50,53.3333,54.5455,55.5556,60,62.5
7010 DATA 66.6666,68.5714,72.4286,75,80,83.3333,85.7143,96,100,120
7020 DATA 125,150,160,166.667,200,240,250,300,320,333.333
7030 DATA 400,480,500,600,640,666.667,800,960,1000
7040 RESTORE 6760
7050 FOR I=1 TO 279
7060 READ Freq1k1m(I)
7070 Freq1k1m(I)=Freq1k1m(I)*1000.
7080 PRINT Freq1k1m(I)
7090 NEXT I
7100 RETURN
7110 Reading: !A,B,Vm,Im
7120 OUTPUT @Lcr;"TRIGGER:IMMEDIATE"
7130 OUTPUT @Lcr;"FETC:IMP?"
7140 ENTER @Lcr;A,B,Status
7150 ! OUTPUT @Lcr;"FETC:SMON:VAC?"
7160 ! ENTER @Lcr;Vm
7170 ! OUTPUT @Lcr;"FETC:SMON:IAC?"
7180 ! ENTER @Lcr;Im
7190 RETURN
7200 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
7210 Chart_var: !
7220 SELECT Type$(Typeno)
7230 CASE "150-200Hz" !
7240 X_origin=150
7250 X_range=50
7260 X_axis_label$="Frequency[Hz]"
7270 Y_origin=.1
7280 Y_range=100
7290 Y_axis_label$="A value"
7300 CASE "100-300Hz" !
7310 X_origin=100
7320 X_range=200
7330 X_axis_label$="Frequency[Hz]"
7340 Y_origin=.1
7350 Y_range=100
7360 Y_axis_label$="A value"
7370 CASE ELSE
7380 X_origin=LOG(20)/LOG(10)
7390 X_range=6
7400 X_axis_label$="Frequency log[Hz]"
7410 Y_origin=.1
7420 Y_range=10
7430 Y_axis_label$="A value"
7440 END SELECT
7450 RETURN
7460 Init_chart: !
7470 DIM X_axis_label$[25],Y_axis_label$[25]
7480 INTEGER Trace_num
7490 INTEGER Screen_dims(1:2),Gwindow_dims(1:4)
7500 REAL Y(1:2) !Y(1)=A, Y(2)=B
7510 GESCAPE CRT,36;Screen_dims(*) ! Get screen width and height.
7520 !
7530 ! Set the dimensions of the graphics window using GESCAPE 33 so
7540 ! that it is centered on the screen.
7550 !
7560 Gwindow_dims(1)=Screen_dims(1)*.25 ! X of upper left.
7570 Gwindow_dims(2)=Screen_dims(2)*.2 ! Y of upper left.
7580 Gwindow_dims(3)=Screen_dims(1)*.7 ! Width.
7590 Gwindow_dims(4)=Screen_dims(2)*.6 ! Height.
7600 GESCAPE CRT,33;Gwindow_dims(*) ! Set graphics window geometry.
7610 !
7620 GESCAPE CRT,35 ! Move the graphics window to the top.
7630 !
7640 ! Create a stripchart. Make it invisible until all changes are made.
7650 !
7660 ASSIGN @Strip TO WIDGET "STRIPCHART";SET("VISIBLE":0)
7670 !
7680 ! Set the overall attributes.
7690 !
7700 CONTROL @Strip;SET("TITLE":"Data Logger")
7710 CONTROL @Strip;SET("MINIMUM SCROLL":2)
7720 CONTROL @Strip;SET("MOVABLE":0)
7730 CONTROL @Strip;SET("MAXIMIZABLE":0)
7740 CONTROL @Strip;SET("X":0,"Y":0)
7750 !
7760 ! Size the stripchart to exactly fill the graphics window.
7770 !
7780 Vert_borders=26
7790 Horiz_borders=8
7800 Height=Gwindow_dims(4)-Vert_borders
7810 Width=Gwindow_dims(3)-Horiz_borders
7820 CONTROL @Strip;SET("WIDTH":Width,"HEIGHT":Height)
7830 !
7840 CONTROL @Strip;SET("CURRENT AXIS":"X")
7850 CONTROL @Strip;SET("ORIGIN":X_origin,"RANGE":X_range)
7860 CONTROL @Strip;SET("AXIS LABEL":X_axis_label$)
7870 !CONTROL @Strip;SET("DIGITS":5)
7880 !
7890 CONTROL @Strip;SET("CURRENT AXIS":"Y")
7900 CONTROL @Strip;SET("ORIGIN":Y_origin,"RANGE":Y_range)
7910 CONTROL @Strip;SET("AXIS LABEL":Y_axis_label$)
7920 !
7930 CONTROL @Strip;SET("VISIBLE":1) ! Show the stripchart.
7940 !
7950 RETURN
7960 END
7970 SUB Errors
7980 DIM Err$[50]
7990 Sp=SPOLL(717)
8000 IF BIT(Sp,5) THEN
8010 OUTPUT 717;"*ESR?"
8020 ENTER 717;Esr
8030 PRINT "Event Status Resister = ";Esr
8040 LOOP
8050 OUTPUT 717;"SYST:ERR?"
8060 ENTER 717;Err$
8070 EXIT IF VAL(Err$)=0
8080 PRINT Err$
8090 END LOOP
8100 END IF
8110 ENABLE INTR 7;2
8120 SUBEND